www.set-mfg.com

 

 

Please visit our store

 

www.settech-arc.com

 

Follow us on Facebook @

 

https://www.facebook.com/SetTechArc

 

Connect with us on LinkedIn

Silicone And Epoxy Technology

 

Follow us on Twitter

 

@settecharc

 

Follow us on IG

 

siliconeandepoxytech

 



 

www.set-mfg.com

Silicone & Epoxy Technology would like to invite you to check out our newest website that is geared toward different types of silicone's, people who work with potting material, encapsulation, thermally conductive materials, 5 minute epoxy, 30 minute epoxy, or even if your looking for epoxy flooring and so much more. 
                                                            

New Product Alert
Note: On first case order you get 1 can free

HI-BOND 1000

(Red Cap) Hi-Bond 1000 DC 12653 Aerosol Hi Temperature Web Contact Adhesive - is a high quality synthetic rubber general purpose aerosol contact adhesive. This product offers high initial tack for constant bonding, while also giving excellent bonds at elevated temperatures. HI-BOND 1000 forms strong permanent bonds between porous and non-porous surfaces such as carpets, liners, foam, wood, plastic and FRP.
$13.65 ...a can or $151.80 a case

General Purpose Web Adhesive

 

(Green Cap) Web Aerosol DC 12886-is a high quality synthetic rubber general-purpose aerosol contact adhesive. This product offers high initial tack for contact bonding. DC 12886 forms strong permanent bonds between porous and non-porous surfaces such as carpets, liners, foam, wood, plastic and FRP.
$10.65 a can or 115.80 a case

General Purpose Mist Adhesive

(Blue Cap) Mist Aerosol DC 12934- is a high quality synthetic rubber general-purpose aerosol contact adhesive. This product offers high initials tack for contact bonding. DC 12934 forms strong permanent bonds between light weight porous and non-porous surfaces such as metal foils, paper, cardboard, foam, wood, plastic and FRP. This product can be used for permanent and temporary bonding of labels, gaskets, insulation, fabric to be stitched, displays, ect.
$10.65 a can or $115.80 a case

Lifecasting, as simple as 1 2 3

Life casting

 

The one thing I hear a lot is , I wish they could stay little all the time! Well I have a way for you to capture that moment in time and keep it to remind yourself of just how precious they are. I received this poem from my son a few years back when I looked at it again the handprint that he had on it was so cute and small, but the paper was worn and ripping from being in the folder for so long. So here is a simple solution that is easy as can be for you to keep or give to a loved one. 

Call (631) 920-5079

or 

Email: salesset@optonline.net

 

 

 "I miss you when we're not together
I'm growing up so fast
See how big I've gotten
Since you saw me last?
As I grow, I'll change a lot,
The years will fly right by.
You'll wonder how I grew so quick -
When and where and why?
So save this print in a safe place
And take it out each year.
The memories will come back of me,
When I was small and dear."

 

What a better way to capture your child's most precious hands?

 

 

 Photo Credit to Smooth-On

 

 

73 Dayt till Halloween

73 DAYS LEFT

UNTIL

HALLOWEEN

 

 

 

Now is the time to come and get a head

 

start on your costumes.

 

Come get your Zombie on with

 

Ultimate Zombie Kit

 

 

Add a little blood to it with

 

Ultimate Blood Kit

 

 

OR

 

Make some realistic wounds with

 

Ultimate Wound Kit

Call 631-920-5079

or

Email: salesset@optonline.net

to get yours

 



Silicone& Epoxy Technology

 

Your complete source for specialty Epoxy, Silicone & Urethane

 

Tel:631-920-5079             Fax:631-920-0503

Our Store: www.settech-arc.com

 Web Site: www.set-Mfg.com

Lourae Inc, DBA

 

EpoxAmite Laminating System   Pot Life   Cure Time     Mix Ratio/pbw

1.      EpoxAmite 101 Fast          11 min    6-8 Hours        100A:24B

2.      EpoxAmite 102 Medium  22 min    10-15 Hours    100A:29B

3.      EpoxAmite 103 Slow         55 min    24 Hours         100A:28.4B

 

EpoxyAcoat Red or Gray

1.      EpoxAcoat Red   Paste      20 min    16 Hours           100A:15B

2.      EpoxAcoat Grey Paste       20 min    16 hours           100A:15B

 

EpoxAcast- Castable Epoxies

1.EpoxAcast 650  Fast             20 min     1 hours              100A:12B(Mineral Filled)

2.EpoxAcast 655  Fast             30 min     3 Hours              100A:10B(Aluminum Filled)

3.EpoxAcast 670 High Temp  3 Hours   24 Hours            100A:16B(350F/177C)

4.EpoxAcast 690 Clear            5 hours    24 Hours            100A:30B UV resistant

 

Specialty Epoxies

1.      Tarbender (Bar Coating)   45 min     16 hours           2A:1B      (UV Resistant)

2.      Epsilon w/101 fast              15 min     16 Hours          100A:20B (Thixotropic)

3.      Epsilon w/101 Med           30 min     24 Hours          100A:25B (Thixotropic)

 

High Performance Bonding

 

Metalset A4 is a powerful met-filled epoxy that bonds to porous or non-porous surfaces and can be applied to vertical surfaces without sagging. Cured epoxy can be machined as well as sanded.

 

 

MT-13 is a two-component, premium industrial epoxy for applications requiring maximum holding power and water resistance. MT-13 is widely used by the boating industry for assembly and general repair.

 

 

EA-40 is a low viscosity epoxy that can be used for assembly and repair applications. Bow makers know EA-40 as an easy to use, reliable Laminating resin.

 

PC-3 Black Tabletop Cement is a general purpose epoxy designed to permanently laminate tabletops.

 

Send any inquiries to sales@settech-arc.com

or call (631) 920-5079

First time buyer receives 10% off  XTC-3D® High Performance 3D Print Coating

Click To Enlarge Image XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. It does not melt plastic. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use: 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D® does not contain VOC's, phthalates or phosphates. Click here to see a video on the benefits of using XTC-3D Extending Working Time - If left in a mixing cup with a concentrated mass, pot life will be short and material may cure in your cup due to exotherm. Important - Reduce the mass of the mixture to increase working time. Example: layer two sheets of aluminum foil together and create a single-use flat tray with vertical sides to contain the liquid resin. After mixing parts A and B, pour mixture into the aluminum foil to reduce the mass. Your working time will be significantly increased. Mixing – Be sure mixing utensils have a square edge and are clean. Combine and mix proper amounts of Parts A and B. Mix thoroughly for at least 1 minute. Aggressively scrape the sides and bottom of mixing container several times. Use the square edge of mixing stick to bring material off of the sides and bottom of container and blend. Important - Mixed XTC-3D® Resin is exothermic, meaning it generates heat. A large, concentrated mass of mixed material in a container can generate enough heat to melt a plastic cup, burn your skin or ignite combustible materials. If material begins to exotherm, move it to an open air environment. Credit to Smooth-On